Pinball,pinball tools,pinball repair,pinball restore,pinball rivets,pinball restoration Polishing Kits
 

Home PageSuppliesToolsBrushesPaint PensHardwareRivetingTumblersKnivesMisc.Gift CertificatesAbout UsContact UsSite MapLinksDisclaimerShippingElectronics

 

  These kits are designed to be used when bringing your playfield back to that like-new shine!

Img18.jpg

 Premium Polishing Kit

This Premium Kit includes a 3" pad holder that chucks into any electric drill motor, three polishing pads and four 8oz bottles of polishing compound. The pads are matched to the compounds. The black foam pad goes with the Light Cut and Medium Cut compounds for ball and swirl mark remover. The yellow foam pad goes with the Medium-Heavy and Heavy compounds for ground-in dirt and heavy ball marks. The wool pad is used for buffing your wax job. We do not recommend using the Heavy Cut with any pins that don't have Diamond Plate or another heavy factory clearcoat (mostly before 1991). Med-Heavy is as coarse as you should use on older pins. Comes with instructions for achieving the best results.

LIQUIDS CANNOT BE SHIPPED OUTSIDE THE USA

Ships ground within the USA

$50.00 for the full Premium Kit

 

 

Img135.jpg

Tight Spots Polishing Kit

This kit is for tight spots on the playfield like around the pop bumpers. This includes a 2" pad holder and 4 polishing pads. Green Foam for Heavy and Med-Heavy, Felt pad for Medium and Light, and a black soft wooly pad. Makes a great add-on to the Premium kit above.

$29.50 per kit

 

 

Img136.jpg

 Light Cut Polishing Compound

This is an 8oz bottle of our Light Cut compound. This is used for removing light haze as well as final gloss polish after using one of the heavier compounds.

LIQUIDS CANNOT BE SHIPPED OUTSIDE THE USA

Ships ground within the USA

$7.00 per 8oz bottle

 

 

Img137.jpg

 Medium Cut Polishing Compound

This is an 8oz bottle of our Medium Cut compound. This is used for removing ground in dirt and ball marks. Follow with Light Cut and then wax for that wet look shine.

LIQUIDS CANNOT BE SHIPPED OUTSIDE THE USA

Ships ground within the USA

$7.00 per 8oz bottle

 

 

Img138.jpg

 Medium-Heavy Cut Polishing Compound

This is an 8oz bottle of our Medium-Heavy Cut compound. This is used for removing scratches and ball trails. This is the heaviest compound recommended for pins without modern factory clearcoats, most pre 1991 pins. Follow with Light Cut and wax for the wet look.

LIQUIDS CANNOT BE SHIPPED OUTSIDE THE USA

Ships ground within the USA

$7.00 per 8oz bottle

 

 

Img139.jpg

 Heavy Cut Polishing Compound

This is an 8oz bottle of our Heavy Cut compound. This is used for removing heavy ball trails and on dull mylar. This compound is only recommended on pins with modern factory clearcoat, mostly 1991 and up. Follow this with our Light Cut and wax for a wet look shine.

LIQUIDS CANNOT BE SHIPPED OUTSIDE THE USA

Ships ground within the USA

$7.00 per 8oz bottle

 

 

yellowfoam2.jpg

 Yellow Foam Polishing Pad

This is a replacement pad for the Premium Polishing Kit. Yellow Foam for Heavy and Med-Heavy compounds. Velcro backed for attachment to the Arbor.

$6.50 each

 

 

blackfoam2.jpg

 Black Foam Polishing Pad

This is a replacement pad for the Premium Polishing Kit. Black Foam for Medium and Light compounds. Velcro backed for attachment to the Arbor.

$6.50 each

 

 

woolpad2.jpg

 Wool Polishing Pad

This is a replacement pad for the Premium Polishing Kit. Wool for buffing and wax. Velcro backed for attachment to the Arbor.

$6.50 each

 

 

arbor1.jpg

 Polishing Arbor

This is a replacement arbor for the Premium Polishing Kit. Velcro faced with 1/4" shank to fit most any drill.

$8.50 each

 

 


 

 


Home Page | About Us | Contact Us | Supplies | Site Map |  | Brushes | Links | Paint Pens | Hardware | Riveting | Tumblers | Misc. | Disclaimer | Gift Certificates | Knives | Shipping | Tools | Electronics